MDU S3 with SE-IR trays and Basket
Art.-No. 857-01482|MDU-S3-BWX|Details
- Maximum 48 Fibre Splices
- 250µm IR Angled Fibre Management System with provision for 3 PLC Splitters
- 4 SE-IR Trays with 3A Splice Bridges
- 3 x Entry/Exit Port Blanks
- 循环储物篮
- 力量成员锚
- 内置的精神层面
- IP54/IK08
- UV Stable
- V0等级
More products in this product group:
应用 | 设计用于在FTTX网络的最后一英里内部署。该外壳可以在pont(P2P)的点内使用,也可以在添加PLC拆分器,连接或裸端,辫子和适配器的点上使用多点(P2MP)。 |
颜色 | Grey RAL 7035 (RAL7035) |
内容 | S3外壳 250µm IR Fibre Management System 4 SE-IR Trays with 3A Splice Bridges 3 x Entry/Exit Port Blanks 循环储物篮 Cable Anchor 内置的精神层面 Fibre Picker 壁挂套件 红色和绿色的多旋转油管(2m) |
Material | 丙烯腈丁二烯苯乙烯(ABS) |
Pack cont。 | 1pc. |
Package Content packed in | EA |
部分说明 | MDU-S3-BWX |
端口计数 | 7 |
产品系列 | Fibre Optic External/Internal Enclosure |
产品组 | S3 Series MDU/MBU Enclosures |
Qty Trays | 4 |
剪接容量 | 48 |
技术说明 | The S3 enclosure is configured with the HellermannTyton 250µm IR Management System. The management system accommodates 4 SE-IR trays giving a maximum of 48 3A fibre splices and 3 PLC splitters. The position of the fibre management system allows for easy access for the routing of fibre on to the trays. The trays and fibre optic routing modules are white which makes it easy to see the colour of the fibre elements as they are routed through the positive fibre management system. Fibre slot retaining blocks guide the fibre elements on to the IR system; the foam pad on the retainer is partially cut through to accommodate a range of fibre counts. All IR system cover plates are coloured blue identifying them as removable parts allowing access to the fibre, the fibre retaining block and tray retaining clips are coloured red to aid in identification if they are dropped. A loop storage basket is fitted for management of fibre loops and is located on left hand side of the enclsoure. The enclosure is 340 x 247 x 76mm (H x W x D) and manufactured in light grey (RAL 7035), UV stable ABS (Acrylonitrile Butadiene Styrene) and has an IP54, IK08 and V0 rating. Designed with 7 input/output ports, 3 across the bottom, 2 on the top and 1 on each side, each port will accommodate a 20mm cable gland. A 100 x 25mm inset position on the front cover allows for a customer logo to be moulded in to the enclosure. |
Type of Tray | 集成路由SE,250µm |
变体 | 室内/室外FTTX外壳 |